York Wire Company.

Thermal Class:

200°C

NEMA:

TF-1, TYPE 5

MIL

-I-3190/6...

MIL

-P-18057 (grade A)

UL FILE:

E123956 (grade A)

Description:

TURBO™ 117E is comprised of specially formulated high temperature silicone rubber extruded onto premium electrical grade braided fiberglass sleeving. The extrusion process results in a higher density coating that is more homogeneous, has better concentricity and yields longer continuous lengths than the typical liquid dipped products common to the industry.

Recommended Use:

TURBO™117E is used for insulation of leads and connections in electrical and electronic components (transformers, coils, relays, solenoids etc.) where temperature extremes from -70°C through 200°C are encountered. Silicone rubber coated glass sleeving is the only flexible insulating material which remains useful for continuous service in ambient temperatures from -70°C through +200°C.

Physical Properties:

Thermal

TURBO™ 117E is rated Class H by IEEE standards, acceptable for continuous service from -70°C through 200°C. Operation at temperatures up to 315°C is tolerated for short durations. TURBO™ 117E exceeds all requirements of UL Subject 224 for 200°C, 600-volt operation. It also exceeds the requirements of MIL-I-3190, MILP-18057, and ASTM D372.

Environmental

TURBO™ 117E is resistant to moisture, corona, ozone, radiation, compression set, fungus, most chemicals and solvents, weathering, flexure fatigue and heat degradation.

Flammability

TURBO™ 117E burns slowly. The coating maintains its electrical integrity - even under severe fire conditions- by forming a non-conductive ash.

Availability

Sizes

TURBO™ 117Eis available in continuous spooled lengths or cut lengths in NEMA sizes #20 through ¾".

Colors

TURBO™ 117E is available in white, black and iron oxide red. Other colors may be available subject to minimum order quantities and/or setup charges.

Dielectric Grade	Min. Ave. Breakdown	Min. Indiv.
A	7000	6000
B	4000	2500
C-1	2500	1500